Product Overview
MicroMarmo Primer
Specialty primer for MicroMarmo Products
Primer of rough surface adhesion, specific to facilitate the anchoring of plaster on smooth or poorly absorbent supports (tiles, glass, cellular concrete, plasterboard, plaster). It is used as a special adhesive with high adhesion to substrates where normally the plasterwork would have major adhesion problems (eg marble or plaster on plasterboard, gypsum, cellular concrete, ceramic tiles).
MICROMARMO PRIMER is ready to use, needs to be well mixed before use, and applied directly with brush or roller. Before laying mortar or adhesives, wait at least 24 hours.
The surfaces must be perfectly cleaned, without the slightest trace of dust. On blunt surfaces, it is necessary to consolidate with a DERASOL H2O diluted 1: 1 with water, and after a minimum of 24 hours minimum, MICROMARMO PRIMER.
Avoid applying the product with relative air humidity over 80%); Do not apply on damp surfaces or where infiltrating humidity has been noticed.
Size / coverage
1 Quart - 70-80 sqf
1 gallon - 4 liters - 280-320 sqf
4 gallons - 15 liters - 1000 - 1200 sqf
